F-22 Raptor 172 Hobby Master Diecast Model USAF Jet Fighter Airplane HA2811B

Posted on August 29, 2021 by admin Posted in f-22

F-22 Raptor 172 Hobby Master Diecast Model USAF Jet Fighter Airplane HA2811B

Lockheed F-22A Raptor 01. First Production F-22 Aircraft. 1:72 Scale Length 8.5. Hobby Master Limited Edition. Die Cast Metal Model. All models Mint in Box. Diecast metal construction with some plastic components. Realistic panel lines, antennas, access panels and surface details. Pad printed markings and placards. Opening canopies, detailed cockpit interiors. Interchangeable extended/retracted landing gear. Presentation stand to display the aircraft “in flight”. Authentic detachable ordnance loads complete with placards. Accurately detailed underside with concealed screwheads. See More high quality diecast and factory built aircraft, tanks and ships at my military diecast store below! World War Diecast Models. The item “F-22 Raptor 172 Hobby Master Diecast Model USAF Jet Fighter Airplane HA2811B” is in sale since Tuesday, June 8, 2021. This item is in the category “Toys & Hobbies\Diecast & Toy Vehicles\Aircraft & Spacecraft\Contemporary Manufacture”. The seller is “ww2militarymodeler” and is located in Northampton, Massachusetts. This item can be shipped worldwide.

Material: Diecast Metal
Scale: 1:72
Brand: Hobby Master

AFe Magnum Force Cold Air Intake For 17-19 Ford F150 / Raptor 3.5L V6 EcoBoost

Posted on May 2, 2021 by admin Posted in magnum

AFe Magnum Force Cold Air Intake For 17-19 Ford F150 / Raptor 3.5L V6 EcoBoost

(NOT FOR SALE OR USE IN CALIFORNIA). FLOW INCREASE +92% HORSEPOWER +NA HP TORQUE MAX GAINS +NA LBS. O -NOT FOR SALE OR USE IN CA WE WILL CANCEL ORDER WITH CA ADDRESS. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Top Mounted Heat Shield Design: aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Air Filter: Large 5-3/4″ Inverted Top Conical Filter with a 5-1/2″ flange opening provides greater airflow over Stock intake system. This washable/reusable 5-layer progressively finer mesh cotton gauze oiled media air filter provides maximum airflow for increased horsepower and torque. Hassle-Free Installation: All clamps, silicone coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Most of our products are direct from distributor and are intended for jobber purpose, so they may not come with instruction manual. Professional mechanic are recommended for installation. This can avoid many problems that can often be found with an inexperienced installer of aftermarket products. No return will be accepted after 30days. All of our merchandise are insured by the carrier who assumes all the responsibility of damages, theft or lost. Some products are intended for off-road or show purposes only. They are not intended to be used for regular driving conditions. Please check with your local DMV for legality issue. Powered by SixBit’s eCommerce Solution. The item “AFe Magnum Force Cold Air Intake For 17-19 Ford F150 / Raptor 3.5L V6 EcoBoost” is in sale since Friday, March 30, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “revotec” and is located in 00000. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Brand: aFe Power
Manufacturer Part Number: 54-32972-B
Fitment Type: Performance/Custom
Warranty: Unspecified Length
California Prop 65 Warning: Cancer and Reproductive Harm
Country/Region of Manufacture: United States
UPC: Does Not Apply
NOTE: 17-18 F150/ F150 RAPTOR 3.5L V6 ECOBOOST TWIN TURB
CARB EO #: NOT FOR SALE OR USE IN CA
FLOW INCREASE: +92%

AFe Magnum Force Cold Air Intake for 2017-2020 Ford F-150 & Raptor EcoBoost 3.5L

Posted on May 2, 2021 by admin Posted in magnum

AFe Magnum Force Cold Air Intake for 2017-2020 Ford F-150 & Raptor EcoBoost 3.5L

Magnum FORCE Stage-2 Cold Air Intake System w/Pro DRY S Filter Media. Picture shown are for reference only, may not be for your specific vehicle. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle. Outflows factory intake by 50%. Pro DRY S Oil-Free 3-Layer Synthetic Media for Maximum Convenience With Excellent Filtration Efficiency. Powder-Coated One Piece Heat Shield utilizes stock mounting locations. CAD-Designed Roto-Molded Intake Tube. No Cutting or Drilling on OEM Parts for Faster Installation. High Quality Tube: This system uses a high quality plastic computer designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Top Mounted Heat Shield Design: aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Air Filter: Large 5-3/4″ Inverted Top Conical Filter with a 5-1/2″ flange opening provides greater airflow over Stock intake system. This washable/reusable 3-layers of synthetic media providing maximum airflow and performance. Hassle-Free Installation: All clamps, silicone coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts Fitment Note: This air intake kit will fit on Ford F-150 18-20 equipped with the V6-2.7L(tt) EcoBoost but will require Intake Air Temperature (IAT) Sensor extension harness part number 54-22979.. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle… Please inspect your order upon receipt. Returning an item without following proper procedures will delay the claim process, and we reserve the right to refuse any unauthorized return Packages. In some occasions we might request images as supporting document for damage/ defective claims to help us determine the best and most effective resolution toward the problem. Powered by SixBit’s eCommerce Solution. The item “AFe Magnum Force Cold Air Intake for 2017-2020 Ford F-150 & Raptor EcoBoost 3.5L” is in sale since Friday, April 24, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Air Intake & Fuel Delivery\Air Intake Systems”. The seller is “sabersport” and is located in USA. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Brand: aFe POWER
Manufacturer Part Number: 51-32972-B
California Prop 65 Warning: Cancer and Reproductive Harm
Features: Cold-Air
Type: Cool Air Intake
Fitment Type: Performance/Custom
Mounting Hardware Included: Yes
Warranty: Unspecified Length
Country/Region of Manufacture: United States
Availability: Item will be drop ship directly from their distributor
HP GAIN: — HP
TORQUE GAIN: lbs/ft
Country of Manufacture: United States
UPC: Does Not Apply
CARB Legal: No
OE Spec or Performance/Custom: Performance/Custom

Luminox f-22 raptor series 9270 good condition. Titanium. Official USAF version

Posted on November 20, 2020 by admin Posted in luminox

Luminox f-22 raptor series 9270 good condition. Titanium. Official USAF version

Luminox f-22 raptor series 9270 good condition. The item “Luminox f-22 raptor series 9270 good condition. Titanium. Official USAF version” is in sale since Wednesday, November 18, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Watches\Wristwatches”. The seller is “maud.m.olfwwpv” and is located in Providence, Rhode Island. This item can be shipped to United States.

Brand: Luminox
Type: Wristwatch
Model: F-22 Raptor 9270 series
Style: Sport
Department: Men
Movement: Quartz
Features: Water-Resistant

172 F-22A Raptor The Pride of Bay County USAF 325th FW, 43rd FS Hornets

Posted on November 20, 2019 by admin Posted in f-22a

172 F-22A Raptor The Pride of Bay County USAF 325th FW, 43rd FS Hornets

Hobby Master 1:72 Air Power Series HA2820 Lockheed F-22A Raptor Diecast Model USAF 325th FW, 43rd FS Hornets, #02-4040 The Pride of Bay County, 2008. Lockheed F-22A Raptor 02-4040 “The Pride Of Bay County” was delivered on March 22, 2005 and then in 2006 was assigned to the 43rd FS “Hornets” as part of the 325 FW located at Tyndall AFB. The 43rd FS received the first F-22 in 2003 and its primary function is to provide F-22 pilots with advanced air-dominance training. The 43rd FS was organized in 1917 and saw combat during WW I, WW II, Vietnam and formed part of the Alaskan Air Command during the Cold War. Designed to meet a US Air Force requirement for an Advanced Tactical Fighter (ATF) to replace the F-15 Eagle, the F-22 was first flown on September 29th, 1990. The USAF’s ATF program aimed to produce a fifth-generation air superiority fighter that would be better matched against emerging new aircraft such as the Su-27 Flanker. The F-22 uses stealth technology and can function in air superiority, ground attack, intelligence and electronic warfare roles. Despite its capabilities, the F-22 program was relatively short-lived; by 2010 its high cost coupled with the development of the F-35 (a more versatile and less expensive aircraft) led to a cessation of F-22 production funding. Hobby Master’s 1:72 scale F-22 Raptor is constructed almost entirely in diecast metal with near-seamless construction. The cockpit has an articulating hinged smoke-colored canopy that closes with almost no visible gap and opens to reveal a detailed interior with side-mounted fly-by-wire joystick, throttle controls, ejection seat and pad-printed digital display screens. The stabalators are movable, and the under-wing mounted fuel tanks are removable. The landing gear are constructed as complete subassemblies for quick configuration, and a full complement of configurable ordnance exposes structural details when configured in the deployed position. Hobby Master 1:72 Air Power Series. The Hobby Master “1:72 Air Power Series” range presents detailed, ready-made diecast models of military aircraft. Hobby Master “1:72 Air Power Series” diecast airplanes feature. Diecast metal construction with some plastic components. Realistic panel lines, antennas, access panels and surface details. Pad printed markings and placards that won’t fade or peel like decals. Opening canopies, revealing detailed cockpit interiors. Interchangeable extended/retracted landing gear. Presentation stand to display the aircraft “in flight”. Authentic detachable ordnance loads complete with placards. Accurately detailed underside with concealed screwheads. The item “172 F-22A Raptor The Pride of Bay County USAF 325th FW, 43rd FS Hornets” is in sale since Wednesday, October 2, 2019. This item is in the category “Toys & Hobbies\Diecast & Toy Vehicles\Aircraft & Spacecraft\Contemporary Manufacture”. The seller is “theflyingmule” and is located in Grass Valley, California. This item can be shipped worldwide.

Brand: Hobby Master 1:72 Air Power Series
Scale: 1:72
Vehicle Make: Lockheed
Vehicle Type: Airplane
Material: Diecast Metal and Plastic
Theme: 1:72 Air Power Series
Year of Manufacture: 2019
Model: F-22A Raptor
MPN: HA2820_Hobby_Master_Diecast_Metal_and_Plastic_Model_Airplane
Recommended Age Range: 14+
Country/Region of Manufacture: China

« Previous Page

United States Air Force

Tag Archives: raptor